Air filter cleaning instructions

Air filter cleaning instructions

1. Open the suction grille in the Air filter and press the buttons on both sides to pull down gently;

2. Drag the hook on the air Air filter to pull the Air filter obliquely downward;

3. Use an Air filter like a vacuum cleaner to remove dust from it, or rinse it with warm water;

4. If you encounter too much dust, you can use a soft brush and a neutral detergent to clean. After cleaning, drain the water and place it in a cool place to dry;

5. Never use hot water above 50 °C for cleaning, so as to avoid the phenomenon that the Air filter is discolored or deformed, and do not dry it on the fire;

6. After the cleaning is completed, be sure to use the Air filter on the fashion. When installing, hang the Air filter on the protruding part of the upper part of the suction grille, then fix it on the suction grille, and slowly push the back handle of the grille inward. Slide slowly until the entire Air filter is pushed into the grille;

7. The last step is to close the suction grille. This is exactly the opposite of the first step. Press and hold the Air filter signal reset button on the control panel. At this time, the cleaning reminder will disappear.

8. Also remind everyone that if there is too much dust in the environment used by Air Filter, the number of cleanings should be increased depending on the situation, generally half a year is appropriate.